Suma Antibac B

Benefits

• Contains an organo-chlorine compound, giving it a broad spectrum biocidal activity against a wide range of microorganisms, making it a versatile detergent disinfectant
• Fulfills the criteria of Appendix F, the Grade “A” Pasteurized Milk Ordinance 1995 Recommendations of the U.S. Public Health Service when tested by the A.O.A.C. Germicidal and Detergent Sanitizer Test
• Can be used at 100 ppm for most sanitizing operations
• Stock solutions containing up to 25,000 ppm available chlorine are easily prepared
• Entirely soluble and leaves no sludge on button of tanks. Saves labor and clean-up time

How to use

1. Rinsing equipment immediately after use with lukewarm water. Drain
2. Wash with recommended Diversey brand product. Drain
3. Acid rinse equipment using 1 oz. of Sentol cleaner in 5 gal. of cold water (1.6ml/L). Drain
4. Air dry. Protect from dust and dirt
5. Sanitize immediately before reuse with Suma Antibac B use 1 oz. per 12 (0.6 gm/L) gal water (100 ppm available chlorine). Test periodically with Chlorine Test Kit. When solution depreciates to 50 ppm available chlorine, discard. Do not rinse after sanitizing with Suma Antibac B solution unless required by local health regulations, then rinse with potable water
6. Preparation of Antibac B Use Solution Grams/Liter Grams/100 Liters Available Chlorine 0.625 62.5 100 0.93.75 93.75 150 1.25 125 200 3.125 312.5 500
7. Special Applications 1. Deodorizing - Use 1 oz. Antibac B in 2 gal. (3.8 gm/L) of water, 600 ppm available chlorine. Spray or rinse odor problem area. If applied to food contact surfaces, treatment must be followed with a potable water rinse. 2. Sanitizing - Commercial Eggs. a) Wash with approved Diversey Lever product. b) Sanitize eggs by spraying with 100 ppm available chlorine solution using 1 oz. Antibac B in 12 gal (0.6 gm/L of water)
8. Test Method
9. Reagents: Potassium iodide (Kl) Glacial acetic acid 0.0N Sodium thiosulphate Iodine Indicator (stablized starch solution) Procedure: Add 0.2g of potassium iodide (K) and 5ml of glacial acetic acid to a 10ml sample of the use solution, Titrate with 0.01N sodium thiosulphate solution until soluiton is straw-yellow in colour. Add iodine indicator and continue to titrate to a colourless end point. Calculation: Available chlorine ppm = titre (mls) x 35.5

Dilution & usage

Dosing exactly as the Product Information Sheet states it, not converted or rounded. Confirm against the product label before use.

• 1.6ml/LAcid rinse equipment using 1 oz. of Sentol cleaner in 5 gal. of cold water (1.6ml/L). Drain

Safety & handling

Store in original closed containers or (where applicable) in an approved bulk tank, away from sunlight and extreme temperatures. Keep away from acids. Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data Sheet.

Read the product label and the Safety Data Sheet before use. BVTC supplies the current SDS for every product on request.