J-Shop 600 E9ez

Benefits

• Convenient and easy cleaning, it penetrates and lifts heavy soil with mechanical action or elbow grease
• Contains solvent to penetrate and emulsify the grease and contain high active formula to handle most difficult jobs
• Lower in-use costs because more active cleaner goes to work on the soiled area, thus customer saves money
• Rinses free without filming to reduce costly touch-up labor expense. Traces of foam provide for quick rinsing without wasted time to cut through heavy suds
• Prolong investment. Protects machinery by preventing corrosion and flash rusting. Will not harm paint on machinery when used as directed. Degreases engines and parts
• Can be used at water hardness of up to 500 ppm will not affect cleaning ability
• Economical to use. Dilutable with water depending on the type of soil to be cleaned. Designed for both economy and cleaning effectiveness. When diluted in recommended levels, it effectively removes stains, dirt, soil, grease and oil from practically any washable surface
• Biodegradable and Phosphate-free making it an environmentally responsible formula
• Water Based making it a non-flammable cleaner

How to use

1. Concrete Floor Preparation (Medium to Heavy Soils)
2. Pick up all the litter, then dust mop or sweep the floor
3. Mix the cleaning solution by adding 1-part J-Shop 600 E9ez to 10 parts water
4. Mop on the cleaning solution so that the whole floor is thoroughly wet and then allow 10 to 15 minutes contact time on the floor
5. Machine scrub with a floor polisher fitted with 3M Nylon Grit brush or equivalent
6. Flood the floor with water and continue to agitate using the machine. Keep the floor very wet throughout the entire procedure. Pick up the water immediately following agitation. Flood rinse until all loose particles are removed
7. Allow the floors to dry thoroughly
8. Concrete Floor Preparation (Newly Laid Floors)
9. Follow the steps above but use a stiff brush, not necessarily a 3M Nylon Grit brush, with a 1:10 to 1:20 dilution of J-Shop 600 E9ez
10. Rinse floors very well with a hose to flush concrete floor particles away or with an autoscrubber or wet vac
11. Concrete Floor Maintenance
12. Dust mop or sweep as needed
13. Clean with J-Shop 600 E9ez at 1:25 to 1:50 dilution using an autoscrubber / wet vac or 1:15 dilution using a mop and bucket system. Red brushes or medium stiff brushes are recommended
14. Rinse thoroughly
15. Car Engines
16. Use only at recommended dilutions. Dwell time is kept to less than five minutes and then all the product should be rinsed off very well. This will prevent the product from affecting the rubber and plastic parts. Suggested dilutions are 1:5 to 1:10

Dilution & usage

Dosing exactly as the Product Information Sheet states it, not converted or rounded. Confirm against the product label before use.

• 1:10 · 1:20Follow the steps above but use a stiff brush, not necessarily a 3M Nylon Grit brush, with a 1:10 to 1:20 dilution of J-Shop 600 E9ez
• 1:25 · 1:50 · 1:15Clean with J-Shop 600 E9ez at 1:25 to 1:50 dilution using an autoscrubber / wet vac or 1:15 dilution using a mop and bucket system. Red brushes or medium stiff brushes are recommended
• 1:5 · 1:10Use only at recommended dilutions. Dwell time is kept to less than five minutes and then all the product should be rinsed off very well. This will prevent the product from affecting the rubber and plastic parts. Suggested dilutions are 1:5 to 1:10

Safety & handling

Store in original closed containers or (where applicable) in an approved bulk tank, away from sunlight and extreme temperatures. Keep away from acids. Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data Sheet.

Read the product label and the Safety Data Sheet before use. BVTC supplies the current SDS for every product on request.